The items under each BIOS category described in this chapter are under continuous update for better system performance. Otherwise, the LineOut connector on the back panel will not function. The system will record this status and show a warning message on the screen. TM CoreCenter – contains OC Menu panel, users can determine their processor and memory type to optimize its memory capacity. Click on the object in the left window pane to display the status of the object in the right windowpane. There are two viewing types: Revision History Revision V1.

Uploader: Aragis
Date Added: 3 August 2011
File Size: 22.55 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 21417
Price: Free* [*Free Regsitration Required]

Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions.

Instruction manual | MSI KT880 Delta Motherboard

J1 This connector is connected to a 2-pin chassis switch. Thank you for all contributions! Even though the Dynamic Overclocking Technology is more stable than manual overclocking, basically, it is still risky.

If the chassis is opened, the switch will be short. Both connectors are fully compliant with Serial ATA 1. Does anyone from MSI read these boards? Page 64 Power on Agent In this sub-menu, you can configure date, time and jsi programs of the power-on, power-off and restarting features.

This item enables users to select an already-connected hard drive to rebuild the broken array. Pull the lever sideways away from the socket.


Please refer to the following table for detailed dual-channel DDR. To connect to the ATX power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned.

smi All disk members in a formed disk array are recognized as a single physical drive to the operating system. To run this solution, you need to have your Microsoft Setup CD prepared in the CD-ROM, therefore the system will start to install the necessary components after the settings are configured here.

Kill your lag, dominate your game with MSI and Killerâ„¢

If the Password Check is set to Always, the password is required both at boot and at mei to Setup. Our products are under continual improvement and we reserve the right to make changes without notice. What it does is read the communication between the processor mainly and the rest of the motherboard during POST. Select [Enabled] only when the installed AGP card supports this function.

In case the overclocking fails, you can press “Ins” key while system rebooting to restore to the BIOS defaults. Please turn off the power and unplug the power cord before installing the CPU. Click on these toolbar buttons to execute their specific functions.


The PC continue booting, but i prefer shutdown the system.

Kill your lag, dominate your game with MSI and Killerâ„¢

This manual also for: Bootable disk or disk array support. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. You will find the icon in the system tray and on the desktop. The values you set 704 the temperatures are the maximum thresholds for the system for warnings, and the value for fan speeds are the minimum thresholds.

When you select Load Optimized Defaults, a message as below appears: The InstallShield Wizard will begin automatically for installation. Switching it to the “Keep Data” position with power turned off helped.

Thank you in advanced. You must configure second hard drive to Slave mode by setting the jumper accordingly. Don’t have an account? I’ve googled almost everything I could find and tried it all but nothing seems to work. I’ve spent the last day and a half trying to fix this issue to no avail.