Looks like you are just about ready to be without a computer for a while. You can’t post conmments that contain an email address. Also try switching out your power supply. Any clues to what is causing this issue? It’s worth a thousand words.

Uploader: Tygojas
Date Added: 22 May 2010
File Size: 11.40 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 68033
Price: Free* [*Free Regsitration Required]

I would try a W or better. The problem is with your PC not the monitor s.

How can this be resolved. Helpful 0 Not Helpful 1 Comment Flag.

Login to post Please use English characters only. The system speaker is usually a set of four pins and you use the outside pair to connect the speaker.

Open the computer and see if the adus cable plugs into the Motherboard directly or into a video card. If you never get that green led light then either the video card is bad or not seated properly. ASUS has p4s8000 great site to help installing a new board.

ASUS P4S800-MX SE – motherboard – micro ATX – Socket 478 – SiS661FX

Add Your Answer Tips for a great answer: If it has a video card in one of the slots, remove it, try another one in the same slot. You need to go back into your manual and take a good look kx the pin configuration connected from the Mb to your case.


If this p4s00 happening after the post screen, then you have a video driver problem, which can be resolved by booting into safe mode, uninstalling your video card drivers and restarting into normal mode. It’s worth a thousand words. You can’t post conmments that contain an email address. Posted on Sep 06, You can’t post answers that contain an email address.

P4SMX ASUS Motherboard Mainboard Drivers Manuals BIOS

Most motherboards use a green led which represents there is stand-by power running to the board. If mother board is shorted to the system case you will aaus the CPU fan spin for a second. If the monitor does not, you have a dead monitor. Posted on Jan 02, David Payne Level 3 Expert Answers. Try removing the memory and see if you get a beep code for a memory failure. If you have xsus different monitor, hook it up and see if it makes a difference.

A problem with the CPU, memorypower supply or the motherboard itself will cause this problem. When you install an operating system, ie: May 17, Canon iP Portable Printer. Windows, Linux, Unix, etc. Answer questions, earn points and help others Answer questions. If you at least had things separate instead of being an all in one you could just plug another monitor and keep on rolling.

If it does not make a difference. I bought this motherboard and installed with all directions on the manual but when booting it up the monitor light stay on orange instead of green so the integrated graphics don’t seem to be working some how, so I installed a gainward gforce TI in great condition in the vga socket and when boot again the light on monitor goes green for two seconds then goes orange again but the system appeared to be working all fans going, so I plug a speaker to hear if beeps but does not, I cant figuer out the internal speaker yet I’m working on it now, please helpme the computer is a celeron 2.


If the monitor works then you know you have a video output issue.

Take your memory out and then reseat the modules. If it plugs directly into the Motherboard add a video card to the slot nearest the power supply. When it receives no video signal from the computer, it will stay powered for a few seconds before giving up and presuming the PC is off hence azus it stays green for a while, then goes orange.